Cat5e/Cat6 Front-detachable Patch Panel with LED Indicator

• Compliant with international standards TIA/EIA-568A and 568B wiring schemes, supporting Category 5e unshielded solutions.

• Used for interconnection and patching of Category 5e cabling in Gigabit Ethernet networks.

• Advantage of front-detachable design: 4×6 RJ45 modules are detachable, facilitating construction and maintenance.

• Rear cable management without cable ties, with cable management clips for securing different cable diameters, making cable management easier.

• Transparent labeling system for easy area identification.

• Intelligent LED navigation technology enables quick port identification, saving a significant amount of time during installation and maintenance.

• Three indicator states:

    - Red light on: Terminal port connected to network device.

    - Green light on: Terminal port not connected to network device.

    - LED light off: Wiring rack not connected to port for 3/6 wire pair.

• Designed for 19-inch standard racks, 1U height, 24 ports. Installation plate: 1.5mm cold-rolled copper plate with electrostatic powder coating.

• IDC terminals: Nickel-plated phosphor bronze, supporting termination of 22-26AWG cables for at least 300 times.

• Contact pins with 50u gold plating, with durability of at least 1000 plug cycles.

• Front cover made of high-quality PC material, flame retardant grade UL94 V-0 in black.

• Back cover made of high-quality PC material, flame retardant grade UL94 V-0 in white.

• Contact resistance: ≤2.5mΩ (excluding conductor resistance). Insulation resistance: ≥1000MΩ.

• Withstand voltage: 1000V (AC750V) for 1 minute without breakdown or arcing.

• Storage temperature: -40°C to 70°C. Installation temperature: -10°C to 60°C. Operating temperature: -40°C to 60°C.